 |
1. Digital Clamp Meter is mainly for measuring DC and AC voltage, AC current, resistance and diode
2. With continuity buzzer, data hold and insulation test function
3. It is a good helper to test and troubleshoot faults that exist in electronic devices
4. This Digital LCD Multimeter can test Voltmeter Ohmmeter Ammeter. Best device for home maintenance"
Digital Clamp Meter Multimeters of Auto-Ranging
1. The color of the case of the digital display clamp multimeter is black, the color of the jaws is yellow, and a warning slogan is engraved on the back of the case; the film on the panel is black matte, with color printing, and a handle (black braided belt) at the end.
2. The accuracy of the multimeter is high, and the reading error does not exceed 1.2%. The adjustment of the knob should be flexible, and there will be no jumping phenomenon when turning it, and there will be a crisp pause sound every time it is turned to a gear.
3. Circuit board: The chip is a domestic chip with a long service life; the fiberboard material should be good, with a thickness of 1.2mm and a length and width of 122x54mm; the outer diameter of the internal red and black two-color power cord should not be less than 1.3mm, and the conductor should be copper wire; Chip resistors, capacitors, potentiometers, thermistors, diodes, buzzers, etc., should be firmly matched with the circuit board without loosening or falling off; sensors and screens have flexible conduction, long service life, and no poor transmission; good quality LCD. The number of jaw silicon steel sheets is 8 pieces, and the contact size is 6.6X4.1mm.
4. Accessories: one battery, the battery model is 9V 6F22. One red and one black test lead (in a plastic bag), the wire diameter of the test lead is 3.4mm, and the total length is 75cm; the insulating material is a new flame-retardant PVC, and the inner core is copper wire. The hands are nickel-plated copper, with an exposed length of 15mm and a diameter of 2mm, with red and black plastic needle covers and socket covers; an English manual.
5. Note: The error value of chip resistors should be less than plus or minus 1%, and the error value of metal film resistors should be less than plus or minus 0.25%.
| Brand | CROWNMAN |
| Name | Digital Clamp Multimeter |
| DCV | 1000V (±0.5% ) |
| ACV | 200-750V (±1.2% ) |
| ACA | 200A/1000A (±2.5% ) |
| OHM | 200/20K/20M/2000MΩ (±1.0% ) |
| Power | 9V Battery |
| Application | Measuring voltage, current, resistance |
| Packing | Color Box |
WHY CHOOSE CROWNMAN?
Competitive Price - The mature supply chain system and large warehouse ensure that our products are highly competitive in cost and price.
Superior Quality - Quality supervision of the whole process of production from raw materials, manufacturing, packaging, and warehousing to container loading.
On-Time Delivery - The mature logistics management system and geographical advantage ensure that our OTD rate reaches 100%.
Hot Tags: digital clamp multimeter, China, suppliers, manufacturers, factory, wholesale, bulk, buy, price, pricelist, quotation, in stock, made in China
Digital Clamp Meter Multimeters of Auto-Ranging
1. The color of the case of the digital display clamp multimeter is black, the color of the jaws is yellow, and a warning slogan is engraved on the back of the case; the film on the panel is black matte, with color printing, and a handle (black braided belt) at the end.
2. The accuracy of the multimeter is high, and the reading error does not exceed 1.2%. The adjustment of the knob should be flexible, and there will be no jumping phenomenon when turning it, and there will be a crisp pause sound every time it is turned to a gear.
3. Circuit board: The chip is a domestic chip with a long service life; the fiberboard material should be good, with a thickness of 1.2mm and a length and width of 122x54mm; the outer diameter of the internal red and black two-color power cord should not be less than 1.3mm, and the conductor should be copper wire; Chip resistors, capacitors, potentiometers, thermistors, diodes, buzzers, etc., should be firmly matched with the circuit board without loosening or falling off; sensors and screens have flexible conduction, long service life, and no poor transmission; good quality LCD. The number of jaw silicon steel sheets is 8 pieces, and the contact size is 6.6X4.1mm.
4. Accessories: one battery, the battery model is 9V 6F22. One red and one black test lead (in a plastic bag), the wire diameter of the test lead is 3.4mm, and the total length is 75cm; the insulating material is a new flame-retardant PVC, and the inner core is copper wire. The hands are nickel-plated copper, with an exposed length of 15mm and a diameter of 2mm, with red and black plastic needle covers and socket covers; an English manual.
5. Note: The error value of chip resistors should be less than plus or minus 1%, and the error value of metal film resistors should be less than plus or minus 0.25%.
| Brand | CROWNMAN |
| Name | Digital Clamp Multimeter |
| DCV | 1000V (±0.5% ) |
| ACV | 200-750V (±1.2% ) |
| ACA | 200A/1000A (±2.5% ) |
| OHM | 200/20K/20M/2000MΩ (±1.0% ) |
| Power | 9V Battery |
| Application | Measuring voltage, current, resistance |
| Packing | Color Box |
WHY CHOOSE CROWNMAN?
Competitive Price - The mature supply chain system and large warehouse ensure that our products are highly competitive in cost and price.
Superior Quality - Quality supervision of the whole process of production from raw materials, manufacturing, packaging, and warehousing to container loading.
On-Time Delivery - The mature logistics management system and geographical advantage ensure that our OTD rate reaches 100%.
Hot Tags: digital clamp multimeter, China, suppliers, manufacturers, factory, wholesale, bulk, buy, price, pricelist, quotation, in stock, made in China
