Reasons And Solutions For Deviation When Saw Blade Is Used

The new alloy saw blade has passed the qualified inspection at the factory, and generally there will be no deviation. Only after improper use will the deviation occur. The main reasons for the deviation are: 1. The installation of the alloy saw blade is not correct, which will cause the saw blade to run sideways. In this case, the saw blade should be re-adjusted.

2. The unilateral sawtooth is seriously damaged, and the eight-junction has a damaged sawtooth.

3. After the barbaric operation, the saw blade is deformed, and the eight-junction has a plastic repair.

4. The alloy saw blade is blunt, and it is used after the eight-speed cutting tool is ground.

5. If the feed speed is too fast, it will affect the direction of the feed and slow down the feed speed.